ACH-RP2350A-PICO-16MB — RP2350A · 16MB Flash · ARM + RISC-V · Designed in PT

Description

Development board built around the RP2350A — Raspberry Pi’s dual-architecture chip that lets you switch between ARM Cortex-M33 and RISC-V Hazard3 cores at runtime. 16MB Flash. Designed and hand-assembled in Portugal.

Microcontroller

• RP2350A: dual-core ARM Cortex-M33 or RISC-V Hazard3 @ 150MHz
• 16MB external Flash
• Programmable I/O (PIO) — hardware-level custom protocols
• Hardware security: signed boot, OTP fuses

Board features

• Castellated holes + 2.54mm through-hole headers — use on breadboard or solder directly onto your PCB as a module
• JST SH 1.0mm I2C connector — compatible with Qwiic (SparkFun) and STEMMA QT (Adafruit)
• Addressable RGB LED
• USB-C — power and programming
• LDO voltage regulator 1A — power from 5V USB-C or up to 5.5V on VIN
• All available GPIO broken out
• Approximately 50 × 30mm · Designed in PT

In the box

• ACH-RP2350A-PICO-16MB board
• JST SH 1.0mm 4-pin I2C cable
• 2.54mm male headers

Compatible with: Pico SDK · Arduino framework · MicroPython · CircuitPython · Zephyr RTOS